Screen Tight Build a Screen Hardware Kit

You don't need to phone call the local handyman to become custom window screens congenital.

In keeping with the theme of Home Repair Tutor this project is well worth your fourth dimension and simply takes 15 minutes, fifty-fifty if you're not specially handy.

Plus just a few cheap tools are necessary to go this job washed.

Here are the supplies yous'll need for a white aluminum screen:

• White Aluminum Screen Frame Kit
• Spline Roller
• Measuring Tape
• Hacksaw
• Miter Box
• Utility Knife
• These Amazon affiliate links aid support HRT, thank you lot for using them

The total cost could be $36.49 if yous demand to purchase all of the tools.The actual cost of just the screen supplies is $15.10, which isn't bad at all.

The screen frame kit is from Abode Depot and can make a 48-inch by 48-inch frame. Merely if your frame is smaller similar mine (or bigger)  you can customize it by cutting the frame runway to size with a hacksaw.

The tutorial I'm sharing today shows me making a brownish window screen merely the steps are exactly the same for a white version.

I'll share how to build a custom window screen frame and add the fiberglass mesh.

Allow'southward get started and before yous know information technology you'll have a new custom window screen in xv minutes apartment.

Build the Custom Window Screen Frame (Step 1)

If yous have an former screen measure its width and acme.

In my case, I needed to make a screen frame from scratch. The total width of the new screen needed to exist 30 1/eight inches and the total peak needed to be 27 3/iv inches.

My video will walk you through this function of the projection merely there is a picture tutorial as well. I got lucky while filming the video considering information technology was a squeamish sunny mean solar day hither in Pittsburgh 🙂

You lot'll demand to subtract 1 one/ii inches off your width & height measurements to accommodate the width of the screen frame corners that help connect the frame together. Once y'all have these new measurements you tin utilize the hacksaw and miter box to cut the aluminum screen frames.

With the four aluminum sides of the frame cut, you can now join them together with the frame corners. But before y'all do this make sure to have the recess in the frame where the prophylactic spline goes facing upwardly toward you.

This will help you construct the frame properly and eliminate unnecessary frustration that may pb to curse words, fist-pumping at the sky, etc.

Add Fiberglass Screen to the Frame (Step ii)

In one case you know how to replace one fiberglass mesh screen y'all'll be looking to practice information technology for all your window frames or sliding screen door.

Hither'due south the video that shows you this process.

Layout the screen frame on an even, apartment surface.

Lay the fiberglass screen over the frame and so that it is 2 inches wider on all sides.

Identify the spline (the safe tubing) on top of the screen where the recess is located. Embed the spline into the recess with the spline tool (information technology looks like a pizza cutter).

Utilise the utility knife to trim the excess screen. Concord your knife at a 45-caste angle to the screen frame and cutting abroad the backlog fiberglass mesh.

Go back over the spline 1 more time with the spline tool and you're done. WooHoo!!

What'due south Next

You can do this project at whatever time during the year and chances are high you'll practise it meliorate than someone at the hardware store.

Our other tutorial shows how to install custom window screens in old window frames.

If you're doing a bathroom remodel and demand assist, join 1 of our online courses – they'll make your bath renovation much easier!

Let me know if you take any questions and I'll practise my best to assist.

Thank you,

Jeff

Screen Repair Kits, Window Screens

Share this post